Tray Material Sample: 1 each color Blue, Rose and Pink
SternTek® Tray Material is an easy to use, light cured material for the preparation of custom trays.
• Long term dimensional stability
• High strength
• Low shrinkage
• No flex
• Pre-formed 2mm thick sheets offer uniform thickness for even and easy adaptation to casts
• 3 year shelf life
• 1 sheet pink Base Plate Material, 1 sheet Rose and 1 sheet Blue Custom Tray Material
| Composition: | ||
| Glass filler | ||
| UDMA | ||
| TEDMA | ||
| Vinylic ester resin | ||
| Pyrogenic silica | ||
| Additives | ||
| Catalyst | ||
| Pigments | ||
| Working Properties: | ||
| To be cured with UV and/or visible light. See instructions for times. | ||
| Physical Properties: | ||
| Transverse modulus [MPa] | >4000 | |
| Flexural strength [MPa] | >60 | |
3 year shelf life
Good malleability, easy to adapt, easy to trim
Finished custom tray withstands flexing during impression taking during impression taking (high modulus of elasticity)
Odorless
Uniform thickness, strong, not brittle
Stable, not easily deformed during impression taking
Economical to use in prefabricated sheets; Extra material is reusable
No extra support is needed for the handle
Disinfection with standard disinfecting solution has no effect on the stability of the tray
Sufficient working time & quick curing time with UV or halogen light
The material is compatible with the usual elastomeric impression materials
| Composition: | ||
| Glass filler | ||
| UDMA | ||
| TEDMA | ||
| Vinylic ester resin | ||
| Pyrogenic silica | ||
| Additives | ||
| Catalyst | ||
| Pigments | ||
| Working Properties: | ||
| To be cured with UV and/or visible light. See instructions for times. | ||
| Physical Properties: | ||
| Transverse modulus [MPa] | >4000 | |
| Flexural strength [MPa] | >60 | |
3 year shelf life
Good malleability, easy to adapt, easy to trim
Finished custom tray withstands flexing during impression taking during impression taking (high modulus of elasticity)
Odorless
Uniform thickness, strong, not brittle
Stable, not easily deformed during impression taking
Economical to use in prefabricated sheets; Extra material is reusable
No extra support is needed for the handle
Disinfection with standard disinfecting solution has no effect on the stability of the tray
Sufficient working time & quick curing time with UV or halogen light
The material is compatible with the usual elastomeric impression materials
